The Magura Mt7 Danny Macaskill Signature - Disc Brake Set 2200mm Hoses Front + Rear is no longer available, although you may find similar or newer versions below.

Maguras MT7 4-piston brake system with an upgraded HC3 highly adjustable lever presented in Maguras trademark fluorescent yellow as requested by the Scotsman himself.

Premium quality setup with a piston/pad configuration to be reckoned with. Sharp enough for trials where wheels need to really anchor down with the heat shedding properties and robustness of a DH brake to make sizzling trail runs. Ride just like Danny!

The lever can be adjusted to alter pressure and bite points and finger reach for a full-custom feel and Lever can be run left or right and caliper is suited to front or rear post mounts.

Limited Edition
Sold as a pair
2300mm hose fitted which can be shortened appropriately with included kit.
4-piston splid-pad configuration for max bike and best heat diffusion.
MacAskill signature on master cylinder.

Applications: Gravity
Material Lever Blade: Alumin.-Hollow
Material Master: Carbotecture SL
Material Caliper: Aluminium
Hydraulic: Yes
Brake Medium: Royal Blood
EBT: Yes
BAT/TPA: No
Banjo Fitting: Yes
2-Piston: No
4-Piston: Yes
Reach Adjust: Yes - SW3
Flip-Flop: Yes
Shift Mix: Opt
Remote Mix: Opt
Recommended Rotor: Storm HC
Lever blade: 1 Finger
Tubing: Magura disc tube
eBike Switch: No
Mounting: PM/IS
Supplied with caliper mounting bolts Hose Ferruls and Olives
Weight: 375g (average weight of both callipers)

Please be aware that the images and description above are usually supplied by the brand / manufacturer and are in no way affiliated with Cycle Centre Congleton Limited T/A CycleStore. Cycle Centre Congleton Limited T/A CycleStore only resell items from third parties and do not design or manufacture any products.